SEDHT High-Temperature Air Dryer
Designed for lines where air leaves the compressor at very high temperature (without pre-cooling), high-temperature air dryers process hot inlet air directly, eliminating the need for a separate pre-cooler. Their reinforced heat exchanger design delivers a stable dew point even under high heat loads.
Capacity
—
Max. Inlet Temperature
—
Dew Point
—
Designed to Withstand High Temperatures
A heat exchanger and refrigeration circuit reinforced to perform stably even at inlet temperatures above the range of standard refrigerated dryers eliminate the need for a separate pre-cooler, reducing system cost and footprint.
- No separate pre-cooler required at high inlet temperatures
- Stable dew point with a reinforced heat exchanger
- Can be installed close to the compressor outlet
- Compact system design with less equipment
- Long service life under industrial load conditions
Continuous Drying at High Temperature
The refrigeration drying cycle cools hot, humid air and separates its moisture by condensation; high-temperature models do this reliably even for air that has just left the compressor and has not yet cooled.
Product Anatomy
Take a closer look at the main components of this product series and their functions.
- 1Inlet / Outlet ConnectionsAir inlet connection point
- 2Inlet / Outlet ConnectionsAir outlet connection point
- 3High-Temperature Heat ExchangerHigh-temperature heat transfer
- 4Refrigeration CompressorCompresses the refrigerant gas
- 5Pressure SwitchMonitors and protects system pressure
- 6CondenserCondenses the refrigerant gas
- 7FanSupplies cooling air to the condenser
- 8Pressure SwitchMonitors and protects system pressure
- 9Filter DrierTraps moisture and particles
- 10Expansion DeviceCapillary tube or expansion valve (varies by model)
- 11Hot Gas Bypass ValveProvides capacity control at low load
Technical Specifications
Capacity and performance table by model (data to be added)
| Model | Capacity (m³/min) | Capacity (Nm³/h) | Weight (kg) | Air Inlet | Dew Point | Max. Pressure (bar) | Avg. Power (kW) | Power Supply |
|---|---|---|---|---|---|---|---|---|
| Model data to be added | ||||||||